How To Install Window Blinds In Cleveland

Numerous Cleveland homeowners turn to window blinds when they want more privacy and management over natural light in their properties. They’re a functional and budget-friendly window treatment. Skilled DIYers may also secure them in a couple of steps. Even so, nothing beats the ease of hiring a qualified window treatment installer. Here are the essential steps of hanging window blinds and when you should phone the experts to complete it for you.

Get Measurements And Mark Everything Exactly

Before you start, figure out if you need inside-mount blinds or outside-mount. This crucial bit of info will help you see where to measure. Take measurements of the height, depth, and width on the inside of your frame for inside-mount blinds. When hanging outside-mount blinds, mark the height and width of your window, counting the trim, and add three inches to each measurement to ensure good coverage. Measure precisely–refrain from rounding up or down. Improperly measured blinds won’t work satisfactorily.

Shop For Blinds

After you know your dimensions, you can choose your blinds. You might already know what type of blinds you would like. Buy blinds that coincide with your measurements as closely as possible. Off-the-shelf blinds might not fit precisely, either jutting out too far or not reaching the end of the window completely. Ensure you get fasteners that let your blinds install at the right depth, as well. You’ll need to order custom-made blinds for a perfect fit.

Install Your Window Blinds

Your blinds should come with instructions. Use them to attach your specific product. If you would like a preview of how hard it is to install window blinds in Cleveland, here are several general steps to offer a better idea.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the window’s frame approximately one inch from the side. Ensure this spot won’t interfere with the blind’s operation. Utilize a pencil to designate the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Situate the bracket where you drilled and drill in the screws.
4. Redo these first three steps for the next bracket.
5. Place the end caps onto the top rail of your blinds. Position the headrail into the brackets.

Hook on the tilt wand and test. Also, test the pull cord.

Outside Mount Blinds

1. Determine if you’re attaching to the wall above the window or the trim. Hold the headrail in place and make sure the blind covers the bottom edge of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark holes for the brackets.
4. Drill pilot holes on your marks.
5. Situate the bracket openings with your wall holes and attach with screws on both sides.
6. Slide the blind rail into the brackets.

Connect the tilt wand and test to ensure everything works.

Opt For The Easiest Way To Install Blinds 

Just a reminder, you aren’t required to put up blinds by yourself. The most effortless way to install window blinds in Cleveland is to hire a trusted window treatment installer. They will guide you at every step of the process. They’ll help you select blinds that meet your needs and preferences, make accurate measurements for a made-to-order product, and put them up for you. They support customers daily, so they’ll complete your project efficiently and accurately. They’ll be able to troubleshoot any concerns without taking hours searching for help online. A window treatment expert will also have better-quality blinds than online or box stores.

Avoid The Hassle And Hire Sunburst Shutters To Install Your Window Blinds In Cleveland

Upgrading to new window blinds in Cleveland couldn’t be easier when you consult with Sunburst Shutters Cleveland. We’ll help you choose made-to-order blinds that will fit your windows exactly, and our professional installation staff will attach them for you. All you have to do is dial 440-561-6787 or fill out the form on this page to schedule a free in-home consultation.